Quality Parts for Scooters, Go Karts, ATV's, Dirt Bikes

help

by

This topic has 5 replies, 4 voices, and was last updated 5 years, 2 months ago by manidon.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
September 2, 2016 at 1:28 pm #16614

john
Participant

Hello all I am so confused. I checked my belt and it says 669-30-11-19 I measured the width and its 11/16 of an inch.I have trouble converting it but is it possible it hasn’t wore at all in 5000 kilometers? Thanks.

September 6, 2016 at 1:21 pm #16646

usman12
Participant

11/16 is a touch over 17mm from memory, so that’s almost 2mm from the original 19mm.

September 6, 2016 at 1:40 pm #16660

honey
Participant

The belt is on a 2014 Dykon 50cc 4T.Are they liable to break if worn too thin? I heard if you lose a mm it should be replaced.

September 6, 2016 at 1:41 pm #16661

honey
Participant

Is there any way that I can possibly seal this temporary to take like a 15 mile trip?

September 6, 2016 at 1:43 pm #16662

honey
Participant

Honda Helix? that looks like it’s really long. is it scary on the freeways eventhough you’re going with the traffic flow??

wow, 600cc?! i have to look at pics of that

September 11, 2016 at 2:37 pm #16705

manidon
Participant

If you search 669-19-30, there should be some belts of that size that come up… but everything I saw was cheap Chinese stuff that I wouldn’t trust. Bando 669-18-30 should work fine if you can’t find the 19mm width you want.
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.